To address a need to have storage for beach days I decided to make use of a few ammo cans I had laying around. The tiedown locations fit the width of an ammo can perfectly.
Drill the jeep body and install 3/8″ nutserts
Level and attach super strut to nutserts.
Same plan for the rear cans.
Paint if needed.
Drill out the ammo can and attach to super strut using spring loaded nuts. Seal the bolt holes using flat washers and silicone.
The lid of the ammo can seal is tight, but it’s weather proof. Coat the inside with a little lithium grease if you want it to open easier.
I didn’t paint the inside but if you wanted it all to match it would be easy to do.
The front ammo can I put support underneath it also. The mounted cans are very useful for a day at the beach to hold utensils, beverages, plates…..pretty much whatever you can fit in them. You could fill them up with ice also if you wanted a cooler.
